top of page
Innovo Security Works Drop Arm Gate Conc


The Concrete Mount option allows your Innovo Drop Arm Gate to install with maximum ease. The concrete mount requires no excavation, increasing flexibility with location and installation options. Additionally, the concrete mount is a great choice for temporary installations, providing a cost effective alternative with many variations available.




DAG Concrete Block.png



  • Lift Hooks and Forklifts Pockets allow for easy installation.


  • Modular Concrete Blocks designed and tested to withstand and immobilize a 200 lb TNT bomb blast and a 20,000 lb vehicle traveling at 50 mph. Blocks can be detached and repositioned as needed.



  • Easy to install, easy to use​

  • Concrete Barrier Gates are above grade and allow for simple, low-cost installation.

  • No excavation is required, saving you time, and safely avoiding underground utilities.

  • No setback distance, no disruptions: barrier can be installed flush with the roadway.


  • Compact Footprints with Clearance Constraints where vertical clearance is available but lateral, forward and rear clearances are limited​

  • Footprints with Underground Obstructions minimal excavation of roadway; foundation excavation outside of roadway​

  • Busy Vehicle Entrances or Sally-Ports with Medium to High Traffic Volume up to 120 duty cycles per hour; low noise thresholds



  • Crash Beam constructed with high strength steel and counterbalanced for easy manual operation when not powered.

  • Superpost Assemblies constructed with high strength steel and anchored on three sides with concrete blocks. Superpost Assemblies are installed above grade, avoiding underground utilities with no excavation required.

  • Receiver MagLock securely locks the beam in place to prevent unauthorized entry.

  • Operating Speed of no more than 5 minutes to secure the barrier in the closed position.

  • Flashing Lights warn traffic when the barrier is moving to prevent entrapment.

  • Warning Horn indicates when the barrier is in motion, avoiding potential vehicle damage or personal injury.

  • Signage and Caution Markings act as visual deterrents and can be seen long before a vehicle approaches the barrier.


Optional LED lights and brightly colored finishes are available.

  • Photoelectric Sensors mitigate risk by preventing the operating beam from closing on authorized vehicles.

  • Electro-mechanical Operator has no risk of hydraulic fluid contamination. Ideal for sites where hydraulic fluids are prohibited.


  • High Duty Cycle ensures continuous traffic flow.

  • Operator Cover locks and encloses the operator with welded steel, preventing unauthorized entry or manipulation. All electrical components are fan cooled and shielded from extreme temperatures and water damage.

  • Emergency Fast Operation (EFO) switch closes the secure beam within 5 seconds, safeguarding against unexpected assailants.

  • Performs through extreme temperatures ranging from -10° to 150° F (-23° to 65° C)

  • Backup or uninterrupted power supply (UPS) are available, ensuring protection in the event of a power failure.

  • Drop Arm Barriers deploy at a normal operating speed of 10 seconds, from horizontal to fully vertical at 90°, allowing for unobstructed use of the roadway.

  • Operators function at a high-duty cycle with 120 open/close cycles per hour, capable of executing 100,000 cycles without disruption.

  • Operation Setup is fast and straightforward: the control panel is easily programmed within minutes.

bottom of page